For the complete documentation index, see llms.txt. This page is also available as Markdown.

Handovers

Review scaffold details, company handover questions and permissions before recording a handover certificate.

Review the correct scaffold, open its handover form and understand the fields before recording a handover.

A handover brings together scaffold details and your company’s handover checklist. The walkthrough below covers desktop navigation and an untouched form. It does not demonstrate a completed certificate, safety approval or permission to use a scaffold.

Before you begin

Create the site and scaffold first. Open the correct scaffold and review its reference, location, dimensions and deck details. If the underlying record is inaccurate, correct it through the scaffold editing workflow before preparing a handover.

The example uses an existing sample scaffold in Pending / Work In Progress. The Add control opened its form from that state. Availability on other scaffold states and roles was not tested.

Desktop: open the handover form

1. Click Sites in the main navigation.

Find the required site in the list.

2. Click the required site code.

Check: the site code and name at the top of the page match the site you intended to open.

3. Click Scaffolds.

The site’s scaffold list opens.

4. Click Pending if its scaffold list is hidden.

Skip this click if the Pending list is already expanded. This example uses a pending scaffold.

5. Click the scaffold code.

Open the existing record. In this example, SCA26000001 appears under Pending with Work In Progress status.

Pending scaffold list with a red circle and arrow marking the SCA26000001 scaffold code to open its record.

Check Overview:

Check the site code, site name, scaffold code and tag number. Review the scaffold and deck dimensions. The sample values in these screenshots are examples, not values to copy into a real handover.

6. Click Handovers.

This tab lists handover records for the selected scaffold. An empty list shows “No data to display” and 0 total.

Scaffold overview for SCA26000001 with a red circle and arrow identifying the Handovers tab.

7. Click the yellow + button.

The Add Handover form opens. It has three sections: Scaffold details, Safety checklist and Handover status. A displayed HAN reference alone does not establish that a handover has been saved. The proposed reference changed on a later opening while the list still showed 0 records; reference-generation behavior remains unverified.

Empty Handovers list showing 0 total and No data to display, with a red circle and arrow identifying the yellow plus button that opens Add Handover.

Desktop: read the form

Check Scaffold details

Check the scaffold and site references in the header. In the inspected form, the tag, description, scaffold dimensions and deck details were prefilled from the existing record. Tag No, Description, Location and scaffold Level were labelled Optional. Deck fields displayed length, width, level and quantity. These are observed labels and values, not a complete validation specification.

Review every default before completing a real handover. “Section Safe for use” displayed Yes in the initial form, while the separate overall “Is the scaffold safe for use?” question was unanswered. A prefilled default is not a safety assessment. The effect of either field on saved status was not tested.

Scaffold details with a red circle and arrow highlighting the initial Section Safe for use value, Yes, which must be reviewed rather than treated as a safety assessment.

8. Scroll to Safety checklist.

The company template inspected here displayed 31 questions in nine groups, with Yes and No choices. Your company’s configured questions may differ. Read each question literally: some ask whether hazards are present, including settlement or instability and nearby overhead obstructions or powerlines. Do not treat Yes as a blanket pass response.

For a real handover, record the actual findings through your company’s authorized safety process. Do not choose answers merely to enable submission. No checklist answers were entered in this walkthrough.

9. Scroll to Handover status.

The form displayed six maximum-load categories, from Access only to Special / Extra Heavy Duty, an overall “Is the scaffold safe for use?” Yes/No question, optional Notes, and a document/photo/video upload area. The displayed load labels are UI choices, not engineering recommendations. Use the approved design and your company’s competent person to establish the correct load and outcome.

Create Handover was disabled on the untouched form. This does not establish all required fields or validation rules. No signature section appeared in the initial form inspected here.

10. Click the back arrow beside Add Handover to leave the untouched form.

For this read-only walkthrough, leave every field, answer and upload unchanged and do not click Create Handover. Returning to Handovers showed 0 total and “No data to display”. Leaving a form after editing values was not tested.

Add Handover header with a red arrow marking the back arrow used to leave the untouched form.

The screenshot marks the exit control before leaving the form; the returned empty list was checked separately.

Template, permissions and follow-up

The Handover Certificate Template supplies your company’s questions and handover details. Review that configuration with the appropriate administrator. Scaffold dimensions and deck configuration should reflect the actual scaffold record.

Scaffolds → Handovers includes Create, View, Update and Approve permissions. A missing action can reflect role restrictions. Use the site and scaffold references when locating handover records in the Handover Log.

Verification limits

Desktop navigation and the untouched initial form were checked on 5 November 2026. Creation, submission, signing, approval, certificate output and changes to scaffold or log status remain unverified. This guide does not establish which answers trigger a status change or prove that a scaffold is safe, approved or certified.

Mobile

Mobile navigation and form layout have not been verified. The screenshots and numbered actions above describe the desktop view only.

Earlier reference

A handover record brings together the scaffold details and your company’s handover checklist. Use it to record the handover information and approvals associated with the correct site and scaffold.

Check the underlying record

  1. Open the relevant site and scaffold.

  2. Review the scaffold Overview, including its reference, location, dimensions and platform details.

  3. Correct inaccurate scaffold details through the scaffold editing workflow before preparing the handover.

Use the configured template

The Handover Certificate Template supplies the company’s questions and handover details. It also uses scaffold dimensions and board configuration from the scaffold record. Check the information presented and record the actual handover details using your company’s agreed process.

Access and follow-up

Scaffolds → Handovers includes Create, View, Update and Approve permissions. A missing action can reflect role restrictions. The Handover Log provides access to issued handover records across sites; use the site and scaffold references when locating the certificate later.

Last updated